Indicate your email address
to receive information concerning
our new services and our offers.

SAF-T-EZE®
REGULAR

ISO 9001 : 2000 Certified

SAF-T-EZE® Regular Grade Anti-Seize is produced from copper, aluminum and graphite. It has thousands of applications but the primary contribution to performance lies in the ability to resist corrosion. Even in the presence of strong chemicals such as caustic solutions, and acids including dilute sulphuric, hydrochloric and nitric, a quality Anti-Seize will continue to resist galvanic attack by sacrificing the metals in the anti-seize in preference to the metal parts under protection.

Applications //

Can be used as a lubricant, a sealer, a break in lubricant, a tapping compound on plastics as well as metals. The surface does not need cleaned before application unless grit or low quality oil/grease is present and ultimate performance is required. The reduction in assembly friction increases torque tension by about 20%. Use on threaded parts, bushings, gears, valve stems, chain sprockets, levers, hinges, pivots, rollers, heat exchanger or manifold bolts, or as a gasket release agent, etc.

This product is not recommended for pure oxygen systems.

Technical Data //


Basic composition	Copper, Aluminum, Graphite
Color	Gray
Temperature	-65°F to 2000°F
NLGI grade	1
Specific Gravity	1.3
Flash Point (C.O.C.)	360°F
Particule size	1 mil. Maximum (Shell 4 Ball Method)

06-11/rev0

	N.B. The information, details, dimensions and values indicated are to our best knowledge. We recommend testing according to local conditions. The specifications are subject to change without notice.
	55, Route 116 West, Danville (Quebec) J0A 1A0 Tel.: (819) 839-2793 Fax: (819) 839-2797 • www.industries3r.com

May we help you find a product ?

SAF-T-EZE

SAF-T-EZE® REGULAR

SAF-T-EZE®
REGULAR