Indicate your email address
to receive information concerning
our new services and our offers.


 

3R 4000
CERAMIC BOARD

ISO 9001 : 2000 Certified
 

The refractory vacuum formed boards are a rigid self-supporting fiber insulation manufactured from a slurry consisting of ceramic fibers and binders. They offer low thermal conductivity, excellent strength and thermal stability at elevated temperatures. M Board products have the capability to withstand chemical attack. Exceptions include hydrofluoric acid, phosphoric acid, and strong alkalis.

The 3R 4000 is a low cost general duty insulation product available in a variety of sizes and thicknesses. It is a rigid self-supporting product that can be produced in different strength ranges to fit individual applications.

 

Applications //

Appliance and heat processing insulation, back up in steel ladle and torpedo cars, back up insulation to dense refractories, combustion chamber construction, expansion joint material, flue and chimney linings, furnace, kiln and oven hot face linings, general molten metal contact, glass coffin walls, glass regenerator insulation, glass tank side, end wall and port neck, glass tank wall and port neck insulation, heat shields, high temperature gaskets and seals, high mechanical stress areas, kiln furniture and trough linings in contact with aluminum.


Physical properties //

 
Color Beige
Nominal density, pcf (kg/m³) 17 (272)
Maximum temperature rating  2 300°F (1260°C)
Continuous use limit 2 000°F (1093°C)
Melting point  3 200°F (1760°C)
Modulus of rupture, psi (Mpa) 100 – 130 (0.68 – 0.89)
Compressive strength, psi (Mpa)
@ 5% def.
@ 10% def.

20 – 30 (0.13 – 0.20)
30 – 40 (0.20 – 0.27)

A small amount of combustible organic binder will burn out at approximately 300°F. Caution should be exercised during the initial heating. Adequate ventilation should be provided to avoid potential flash ignition of the binder out-gassing and to avoid air entry while at elevated temperature.
06-09/rev.0

N.B. The information, details, dimensions and values indicated are to our best knowledge. We recommend testing according to local conditions. The specifications are subject to change without notice.
 
55, Route 116 West, Danville (Quebec) J0A 1A0 Tel.: (819) 839-2793
Fax: (819) 839-2797 • www.industries3r.com



Company  I  News  I  Custom Made Products  I  Contact  I  Site Guide  I  Home  I  Top of page
© Copyright 2008, Industries 3R inc. All rights reserved I 1 819 839-2793


May we help you find a product ?

Industries 3R